Sealex, Inc. Introduces ImmerSeal™ Pre-cured Silicone for Use in Waterproofing Applications

Sealex's ImmerSeal™ Preformed Silicone Joint Sealant is a 100% silicone product that can be used in a wide variety of applications in both the new construction and renovation markets.

Key features of ImmerSeal™ include:

•More economical than cutting out and resealing failed sealant joints
•Beneficial for use in high movement joints, including extremely narrow joints, where conventional sealing materials will fail
•100% silicone formulation is long lasting
•Useful in repair applications where removing old sealant is undesirable due to the presence of hazardous materials in the sealant or substrate
•Effective on soft and sensitive substrates, such as EIFS, where failed sealant cannot be removed without damaging the substrate
•Higher movement capability (+200%/-75%) than any other sealing option
•Successfully seals joints where other sealant materials are ineffective, such as butt joints with insufficient joint depth for bonding of wet applied sealant
•Custom designed extrusions can be used on complex and difficult to seal joints, such as inside and outside corners, parapet caps and window mullions
•Ability to handle multi-directional movement (expansion, contraction & shear)

ImmerSeal™ has been specifically designed as sealing solutions for numerous applications including, but not limited to:

•Expansion joint seals
•Window perimeter & mullion seals
•Curtainwall system joints
•Skylights
•Roofing seals and flashing
•Seals for RV, marine & transportation applications
•Fillet beads for showers/tubs
•Seals for HVAC systems

ImmerSeal™ is available in standard sizes ranging from 1” to 12” wide in standard 2 mm thickness. In addition, custom design profiles, widths and thicknesses are available. ImmerSeal™ is produced with a matte surface and is available in the following colors:
White, Black, Gray, Bronze, Sandstone, Limestone, Charcoal, Blue Spruce, Red Brick, Adobe Tan, Precast, Pale Pink

Custom Colors: Available upon request

Sealex, Inc., located in Harbor Springs, MI, is a leader in the development and manufacture of preformed joint sealant systems. For additional information contact Jason Bakus of Sealex, Inc. at:

Sealex, Inc.
8850 Moeller Drive
Harbor Springs, MI 49740
Ph: (231) 348-5020 F: (231) 348-5020
jbakus@sealexinc.com
www.sealexinc.com